In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix potential array out-of-bounds in decoder queue_setup variable *nplanes is provided by user via system call argument. The possible value of q_data->fmt->num_planes is 1-3, while the value of *nplanes can be 1-8. The array access by index i can cause array out-of-bounds. Fix this bug by checking *nplanes against the array size.

In the Linux kernel, the following vulnerability has been resolved: kcsan: Avoid READ_ONCE() in read_instrumented_memory() Haibo Li reported: | Unable to handle kernel paging request at virtual address | ffffff802a0d8d7171 | Mem abort info:o: | ESR = 0x9600002121 | EC = 0x25: DABT (current EL), IL = 32 bitsts | SET = 0, FnV = 0 0 | EA = 0, S1PTW = 0 0 | FSC = 0x21: alignment fault | Data abort info:o: | ISV = 0, ISS = 0x0000002121 | CM = 0, WnR = 0 0 | swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000 | [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003, | pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707 | Internal error: Oops: 96000021 [#1] PREEMPT SMP | Modules linked in: | CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted | 5.15.78-android13-8-g63561175bbda-dirty #1 | ... | pc : kcsan_setup_watchpoint+0x26c/0x6bc | lr : kcsan_setup_watchpoint+0x88/0x6bc | sp : ffffffc00ab4b7f0 | x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001 | x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80 | x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71 | x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060 | x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000 | x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0 | x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8 | x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70 | x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | kcsan_setup_watchpoint+0x26c/0x6bc | __tsan_read2+0x1f0/0x234 | inflate_fast+0x498/0x750 | zlib_inflate+0x1304/0x2384 | __gunzip+0x3a0/0x45c | gunzip+0x20/0x30 | unpack_to_rootfs+0x2a8/0x3fc | do_populate_rootfs+0xe8/0x11c | async_run_entry_fn+0x58/0x1bc | process_one_work+0x3ec/0x738 | worker_thread+0x4c4/0x838 | kthread+0x20c/0x258 | ret_from_fork+0x10/0x20 | Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) ) | ---[ end trace 613a943cb0a572b6 ]----- The reason for this is that on certain arm64 configuration since e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire instruction which cannot be used on unaligned addresses. Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply forcing the compiler to do the required access by casting to the appropriate volatile type. In terms of generated code this currently only affects architectures that do not use the default READ_ONCE() implementation. The only downside is that we are not guaranteed atomicity of the access itself, although on most architectures a plain load up to machine word size should still be atomic (a fact the default READ_ONCE() still relies on itself).

In the Linux kernel, the following vulnerability has been resolved: fbcon: Set fb_display[i]->mode to NULL when the mode is released Recently, we discovered the following issue through syzkaller: BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0 Read of size 4 at addr ff11000001b3c69c by task syz.xxx ... Call Trace: <TASK> dump_stack_lvl+0xab/0xe0 print_address_description.constprop.0+0x2c/0x390 print_report+0xb9/0x280 kasan_report+0xb8/0xf0 fb_mode_is_equal+0x285/0x2f0 fbcon_mode_deleted+0x129/0x180 fb_set_var+0xe7f/0x11d0 do_fb_ioctl+0x6a0/0x750 fb_ioctl+0xe0/0x140 __x64_sys_ioctl+0x193/0x210 do_syscall_64+0x5f/0x9c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Based on experimentation and analysis, during framebuffer unregistration, only the memory of fb_info->modelist is freed, without setting the corresponding fb_display[i]->mode to NULL for the freed modes. This leads to UAF issues during subsequent accesses. Here's an example of reproduction steps: 1. With /dev/fb0 already registered in the system, load a kernel module to register a new device /dev/fb1; 2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP); 3. Switch console from fb to VGA (to allow normal rmmod of the ko); 4. Unload the kernel module, at this point fb1's modelist is freed, leaving a wild pointer in fb_display[]; 5. Trigger the bug via system calls through fb0 attempting to delete a mode from fb0. Add a check in do_unregister_framebuffer(): if the mode to be freed exists in fb_display[], set the corresponding mode pointer to NULL.

In the Linux kernel, the following vulnerability has been resolved: fbdev: bitblit: bound-check glyph index in bit_putcs* bit_putcs_aligned()/unaligned() derived the glyph pointer from the character value masked by 0xff/0x1ff, which may exceed the actual font's glyph count and read past the end of the built-in font array. Clamp the index to the actual glyph count before computing the address. This fixes a global out-of-bounds read reported by syzbot.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues

In the Linux kernel, the following vulnerability has been resolved: jfs: Verify inode mode when loading from disk The inode mode loaded from corrupted disk can be invalid. Do like what commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk") does.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_conn_free BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline] BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline] BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352 CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted 6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci13 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x191/0x550 mm/kasan/report.c:482 kasan_report+0xc4/0x100 mm/kasan/report.c:595 sco_conn_free net/bluetooth/sco.c:87 [inline] kref_put include/linux/kref.h:65 [inline] sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441 hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline] hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313 hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121 hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147 hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319 worker_thread+0xbee/0x1200 kernel/workqueue.c:3400 kthread+0x3c7/0x870 kernel/kthread.c:463 ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 31370: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4382 [inline] __kmalloc_noprof+0x22f/0x390 mm/slub.c:4394 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xae/0x220 net/core/sock.c:2239 sk_alloc+0x34/0x5a0 net/core/sock.c:2295 bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151 sco_sock_alloc net/bluetooth/sco.c:562 [inline] sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593 bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135 __sock_create+0x3ad/0x780 net/socket.c:1589 sock_create net/socket.c:1647 [inline] __sys_socket_create net/socket.c:1684 [inline] __sys_socket+0xd5/0x330 net/socket.c:1731 __do_sys_socket net/socket.c:1745 [inline] __se_sys_socket net/socket.c:1743 [inline] __x64_sys_socket+0x7a/0x90 net/socket.c:1743 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 31374: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2428 [inline] slab_free mm/slub.c:4701 [inline] kfree+0x199/0x3b0 mm/slub.c:4900 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x4aa/0x630 net/core/sock.c:2373 sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333 __sock_release net/socket.c:649 [inline] sock_close+0xb8/0x230 net/socket.c:1439 __fput+0x3d1/0x9e0 fs/file_table.c:468 task_work_run+0x206/0x2a0 kernel/task_work.c:227 get_signal+0x1201/0x1410 kernel/signal.c:2807 arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] s ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH.

In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq) if list_empty(&m->req_list). However, if the pipe is full, we need to read more data and this used to work prior to commit aaec5a95d59615 ("pipe_read: don't wake up the writer if the pipe is still full"). p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before the commit above) triggered the unnecessary wakeup. This wakeup calls p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux() will notice EPOLLIN and schedule_work(&m->rq). This no longer happens after the optimization above, change p9_fd_request() to use p9_poll_mux() instead of only checking for EPOLLOUT.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds Add bounds checking to prevent writes past framebuffer boundaries when rendering text near screen edges. Return early if the Y position is off-screen and clip image height to screen boundary. Break from the rendering loop if the X position is off-screen. When clipping image width to fit the screen, update the character count to match the clipped width to prevent buffer size mismatches. Without the character count update, bit_putcs_aligned and bit_putcs_unaligned receive mismatched parameters where the buffer is allocated for the clipped width but cnt reflects the original larger count, causing out-of-bounds writes.

In the Linux kernel, the following vulnerability has been resolved: btrfs: ensure no dirty metadata is written back for an fs with errors [BUG] During development of a minor feature (make sure all btrfs_bio::end_io() is called in task context), I noticed a crash in generic/388, where metadata writes triggered new works after btrfs_stop_all_workers(). It turns out that it can even happen without any code modification, just using RAID5 for metadata and the same workload from generic/388 is going to trigger the use-after-free. [CAUSE] If btrfs hits an error, the fs is marked as error, no new transaction is allowed thus metadata is in a frozen state. But there are some metadata modifications before that error, and they are still in the btree inode page cache. Since there will be no real transaction commit, all those dirty folios are just kept as is in the page cache, and they can not be invalidated by invalidate_inode_pages2() call inside close_ctree(), because they are dirty. And finally after btrfs_stop_all_workers(), we call iput() on btree inode, which triggers writeback of those dirty metadata. And if the fs is using RAID56 metadata, this will trigger RMW and queue new works into rmw_workers, which is already stopped, causing warning from queue_work() and use-after-free. [FIX] Add a special handling for write_one_eb(), that if the fs is already in an error state, immediately mark the bbio as failure, instead of really submitting them. Then during close_ctree(), iput() will just discard all those dirty tree blocks without really writing them back, thus no more new jobs for already stopped-and-freed workqueues. The extra discard in write_one_eb() also acts as an extra safenet. E.g. the transaction abort is triggered by some extent/free space tree corruptions, and since extent/free space tree is already corrupted some tree blocks may be allocated where they shouldn't be (overwriting existing tree blocks). In that case writing them back will further corrupting the fs.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Flush shmem writes before mapping buffers CPU-uncached The shmem layer zeroes out the new pages using cached mappings, and if we don't CPU-flush we might leave dirty cachelines behind, leading to potential data leaks and/or asynchronous buffer corruption when dirty cachelines are evicted.

In the Linux kernel, the following vulnerability has been resolved: fs/proc: fix uaf in proc_readdir_de() Pde is erased from subdir rbtree through rb_erase(), but not set the node to EMPTY, which may result in uaf access. We should use RB_CLEAR_NODE() set the erased node to EMPTY, then pde_subdir_next() will return NULL to avoid uaf access. We found an uaf issue while using stress-ng testing, need to run testcase getdent and tun in the same time. The steps of the issue is as follows: 1) use getdent to traverse dir /proc/pid/net/dev_snmp6/, and current pde is tun3; 2) in the [time windows] unregister netdevice tun3 and tun2, and erase them from rbtree. erase tun3 first, and then erase tun2. the pde(tun2) will be released to slab; 3) continue to getdent process, then pde_subdir_next() will return pde(tun2) which is released, it will case uaf access. CPU 0 | CPU 1 ------------------------------------------------------------------------- traverse dir /proc/pid/net/dev_snmp6/ | unregister_netdevice(tun->dev) //tun3 tun2 sys_getdents64() | iterate_dir() | proc_readdir() | proc_readdir_de() | snmp6_unregister_dev() pde_get(de); | proc_remove() read_unlock(&proc_subdir_lock); | remove_proc_subtree() | write_lock(&proc_subdir_lock); [time window] | rb_erase(&root->subdir_node, &parent->subdir); | write_unlock(&proc_subdir_lock); read_lock(&proc_subdir_lock); | next = pde_subdir_next(de); | pde_put(de); | de = next; //UAF | rbtree of dev_snmp6 | pde(tun3) / \ NULL pde(tun2)

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential overflow of PCM transfer buffer The PCM stream data in USB-audio driver is transferred over USB URB packet buffers, and each packet size is determined dynamically. The packet sizes are limited by some factors such as wMaxPacketSize USB descriptor. OTOH, in the current code, the actually used packet sizes are determined only by the rate and the PPS, which may be bigger than the size limit above. This results in a buffer overflow, as reported by syzbot. Basically when the limit is smaller than the calculated packet size, it implies that something is wrong, most likely a weird USB descriptor. So the best option would be just to return an error at the parameter setup time before doing any further operations. This patch introduces such a sanity check, and returns -EINVAL when the packet size is greater than maxpacksize. The comparison with ep->packsize[1] alone should suffice since it's always equal or greater than ep->packsize[0].

In the Linux kernel, the following vulnerability has been resolved: cifs: client: fix memory leak in smb3_fs_context_parse_param The user calls fsconfig twice, but when the program exits, free() only frees ctx->source for the second fsconfig, not the first. Regarding fc->source, there is no code in the fs context related to its memory reclamation. To fix this memory leak, release the source memory corresponding to ctx or fc before each parsing. syzbot reported: BUG: memory leak unreferenced object 0xffff888128afa360 (size 96): backtrace (crc 79c9c7ba): kstrdup+0x3c/0x80 mm/util.c:84 smb3_fs_context_parse_param+0x229b/0x36c0 fs/smb/client/fs_context.c:1444 BUG: memory leak unreferenced object 0xffff888112c7d900 (size 96): backtrace (crc 79c9c7ba): smb3_fs_context_fullpath+0x70/0x1b0 fs/smb/client/fs_context.c:629 smb3_fs_context_parse_param+0x2266/0x36c0 fs/smb/client/fs_context.c:1438

A flaw was found in util-linux. This vulnerability allows a heap buffer overread when processing 256-byte usernames, specifically within the `setpwnam()` function, affecting SUID (Set User ID) login-utils utilities writing to the password database.

The Takeads plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.0.13. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete the plugin's configuration options.

Critical XXE in Apache Tika tika-core (1.13-3.2.1), tika-pdf-module (2.0.0-3.2.1) and tika-parsers (1.13-1.28.5) modules on all platforms allows an attacker to carry out XML External Entity injection via a crafted XFA file inside of a PDF. This CVE covers the same vulnerability as in CVE-2025-54988. However, this CVE expands the scope of affected packages in two ways. First, while the entrypoint for the vulnerability was the tika-parser-pdf-module as reported in CVE-2025-54988, the vulnerability and its fix were in tika-core. Users who upgraded the tika-parser-pdf-module but did not upgrade tika-core to >= 3.2.2 would still be vulnerable. Second, the original report failed to mention that in the 1.x Tika releases, the PDFParser was in the "org.apache.tika:tika-parsers" module.

In the Linux kernel, the following vulnerability has been resolved: Input: cros_ec_keyb - fix an invalid memory access If cros_ec_keyb_register_matrix() isn't called (due to `buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains NULL. An invalid memory access is observed in cros_ec_keyb_process() when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work() in such case. Unable to handle kernel read from unreadable memory at virtual address 0000000000000028 ... x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: input_event cros_ec_keyb_work blocking_notifier_call_chain ec_irq_thread It's still unknown about why the kernel receives such malformed event, in any cases, the kernel shouldn't access `ckdev->idev` and friends if the driver doesn't intend to initialize them.

In the Linux kernel, the following vulnerability has been resolved: xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I missed the case where state creation fails between full initialization (->init_state has been called) and being inserted on the lists. In this situation, ->init_state has been called, so for IPcomp tunnels, the fallback tunnel has been created and added onto the lists, but the user state never gets added, because we fail before that. The user state doesn't go through __xfrm_state_delete, so we don't call xfrm_state_delete_tunnel for those states, and we end up leaking the FB tunnel. There are several codepaths affected by this: the add/update paths, in both net/key and xfrm, and the migrate code (xfrm_migrate, xfrm_state_migrate). A "proper" rollback of the init_state work would probably be doable in the add/update code, but for migrate it gets more complicated as multiple states may be involved. At some point, the new (not-inserted) state will be destroyed, so call xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states will have their fallback tunnel cleaned up during __xfrm_state_delete, which solves the issue that b441cf3f8c4b (and other patches before it) aimed at. All states (including FB tunnels) will be removed from the lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work).

In the Linux kernel, the following vulnerability has been resolved: nios2: ensure that memblock.current_limit is set when setting pfn limits On nios2, with CONFIG_FLATMEM set, the kernel relies on memblock_get_current_limit() to determine the limits of mem_map, in particular for max_low_pfn. Unfortunately, memblock.current_limit is only default initialized to MEMBLOCK_ALLOC_ANYWHERE at this point of the bootup, potentially leading to situations where max_low_pfn can erroneously exceed the value of max_pfn and, thus, the valid range of available DRAM. This can in turn cause kernel-level paging failures, e.g.: [ 76.900000] Unable to handle kernel paging request at virtual address 20303000 [ 76.900000] ea = c0080890, ra = c000462c, cause = 14 [ 76.900000] Kernel panic - not syncing: Oops [ 76.900000] ---[ end Kernel panic - not syncing: Oops ]--- This patch fixes this by pre-calculating memblock.current_limit based on the upper limits of the available memory ranges via adjust_lowmem_bounds, a simplified version of the equivalent implementation within the arm architecture.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix KMSAN uninit-value issue in __hfsplus_ext_cache_extent() The syzbot reported issue in __hfsplus_ext_cache_extent(): [ 70.194323][ T9350] BUG: KMSAN: uninit-value in __hfsplus_ext_cache_extent+0x7d0/0x990 [ 70.195022][ T9350] __hfsplus_ext_cache_extent+0x7d0/0x990 [ 70.195530][ T9350] hfsplus_file_extend+0x74f/0x1cf0 [ 70.195998][ T9350] hfsplus_get_block+0xe16/0x17b0 [ 70.196458][ T9350] __block_write_begin_int+0x962/0x2ce0 [ 70.196959][ T9350] cont_write_begin+0x1000/0x1950 [ 70.197416][ T9350] hfsplus_write_begin+0x85/0x130 [ 70.197873][ T9350] generic_perform_write+0x3e8/0x1060 [ 70.198374][ T9350] __generic_file_write_iter+0x215/0x460 [ 70.198892][ T9350] generic_file_write_iter+0x109/0x5e0 [ 70.199393][ T9350] vfs_write+0xb0f/0x14e0 [ 70.199771][ T9350] ksys_write+0x23e/0x490 [ 70.200149][ T9350] __x64_sys_write+0x97/0xf0 [ 70.200570][ T9350] x64_sys_call+0x3015/0x3cf0 [ 70.201065][ T9350] do_syscall_64+0xd9/0x1d0 [ 70.201506][ T9350] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.202054][ T9350] [ 70.202279][ T9350] Uninit was created at: [ 70.202693][ T9350] __kmalloc_noprof+0x621/0xf80 [ 70.203149][ T9350] hfsplus_find_init+0x8d/0x1d0 [ 70.203602][ T9350] hfsplus_file_extend+0x6ca/0x1cf0 [ 70.204087][ T9350] hfsplus_get_block+0xe16/0x17b0 [ 70.204561][ T9350] __block_write_begin_int+0x962/0x2ce0 [ 70.205074][ T9350] cont_write_begin+0x1000/0x1950 [ 70.205547][ T9350] hfsplus_write_begin+0x85/0x130 [ 70.206017][ T9350] generic_perform_write+0x3e8/0x1060 [ 70.206519][ T9350] __generic_file_write_iter+0x215/0x460 [ 70.207042][ T9350] generic_file_write_iter+0x109/0x5e0 [ 70.207552][ T9350] vfs_write+0xb0f/0x14e0 [ 70.207961][ T9350] ksys_write+0x23e/0x490 [ 70.208375][ T9350] __x64_sys_write+0x97/0xf0 [ 70.208810][ T9350] x64_sys_call+0x3015/0x3cf0 [ 70.209255][ T9350] do_syscall_64+0xd9/0x1d0 [ 70.209680][ T9350] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.210230][ T9350] [ 70.210454][ T9350] CPU: 2 UID: 0 PID: 9350 Comm: repro Not tainted 6.12.0-rc5 #5 [ 70.211174][ T9350] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.212115][ T9350] ===================================================== [ 70.212734][ T9350] Disabling lock debugging due to kernel taint [ 70.213284][ T9350] Kernel panic - not syncing: kmsan.panic set ... [ 70.213858][ T9350] CPU: 2 UID: 0 PID: 9350 Comm: repro Tainted: G B 6.12.0-rc5 #5 [ 70.214679][ T9350] Tainted: [B]=BAD_PAGE [ 70.215057][ T9350] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.215999][ T9350] Call Trace: [ 70.216309][ T9350] <TASK> [ 70.216585][ T9350] dump_stack_lvl+0x1fd/0x2b0 [ 70.217025][ T9350] dump_stack+0x1e/0x30 [ 70.217421][ T9350] panic+0x502/0xca0 [ 70.217803][ T9350] ? kmsan_get_metadata+0x13e/0x1c0 [ 70.218294][ Message fromT sy9350] kmsan_report+0x296/slogd@syzkaller 0x2aat Aug 18 22:11:058 ... kernel :[ 70.213284][ T9350] Kernel panic - not syncing: kmsan.panic [ 70.220179][ T9350] ? kmsan_get_metadata+0x13e/0x1c0 set ... [ 70.221254][ T9350] ? __msan_warning+0x96/0x120 [ 70.222066][ T9350] ? __hfsplus_ext_cache_extent+0x7d0/0x990 [ 70.223023][ T9350] ? hfsplus_file_extend+0x74f/0x1cf0 [ 70.224120][ T9350] ? hfsplus_get_block+0xe16/0x17b0 [ 70.224946][ T9350] ? __block_write_begin_int+0x962/0x2ce0 [ 70.225756][ T9350] ? cont_write_begin+0x1000/0x1950 [ 70.226337][ T9350] ? hfsplus_write_begin+0x85/0x130 [ 70.226852][ T9350] ? generic_perform_write+0x3e8/0x1060 [ 70.227405][ T9350] ? __generic_file_write_iter+0x215/0x460 [ 70.227979][ T9350] ? generic_file_write_iter+0x109/0x5e0 [ 70.228540][ T9350] ? vfs_write+0xb0f/0x14e0 [ 70.228997][ T9350] ? ksys_write+0x23e/0x490 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: hfs: fix KMSAN uninit-value issue in hfs_find_set_zero_bits() The syzbot reported issue in hfs_find_set_zero_bits(): ===================================================== BUG: KMSAN: uninit-value in hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45 hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45 hfs_vbm_search_free+0x13c/0x5b0 fs/hfs/bitmap.c:151 hfs_extend_file+0x6a5/0x1b00 fs/hfs/extent.c:408 hfs_get_block+0x435/0x1150 fs/hfs/extent.c:353 __block_write_begin_int+0xa76/0x3030 fs/buffer.c:2151 block_write_begin fs/buffer.c:2262 [inline] cont_write_begin+0x10e1/0x1bc0 fs/buffer.c:2601 hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52 cont_expand_zero fs/buffer.c:2528 [inline] cont_write_begin+0x35a/0x1bc0 fs/buffer.c:2591 hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52 hfs_file_truncate+0x1d6/0xe60 fs/hfs/extent.c:494 hfs_inode_setattr+0x964/0xaa0 fs/hfs/inode.c:654 notify_change+0x1993/0x1aa0 fs/attr.c:552 do_truncate+0x28f/0x310 fs/open.c:68 do_ftruncate+0x698/0x730 fs/open.c:195 do_sys_ftruncate fs/open.c:210 [inline] __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x11b/0x250 fs/open.c:213 x64_sys_call+0xfe3/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:78 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4154 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x7f7/0xed0 mm/slub.c:4354 kmalloc_noprof include/linux/slab.h:905 [inline] hfs_mdb_get+0x1cc8/0x2a90 fs/hfs/mdb.c:175 hfs_fill_super+0x3d0/0xb80 fs/hfs/super.c:337 get_tree_bdev_flags+0x6e3/0x920 fs/super.c:1681 get_tree_bdev+0x38/0x50 fs/super.c:1704 hfs_get_tree+0x35/0x40 fs/hfs/super.c:388 vfs_get_tree+0xb0/0x5c0 fs/super.c:1804 do_new_mount+0x738/0x1610 fs/namespace.c:3902 path_mount+0x6db/0x1e90 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount+0x6eb/0x7d0 fs/namespace.c:4427 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4427 x64_sys_call+0xfa7/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 12609 Comm: syz.1.2692 Not tainted 6.16.0-syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 ===================================================== The HFS_SB(sb)->bitmap buffer is allocated in hfs_mdb_get(): HFS_SB(sb)->bitmap = kmalloc(8192, GFP_KERNEL); Finally, it can trigger the reported issue because kmalloc() doesn't clear the allocated memory. If allocated memory contains only zeros, then everything will work pretty fine. But if the allocated memory contains the "garbage", then it can affect the bitmap operations and it triggers the reported issue. This patch simply exchanges the kmalloc() on kzalloc() with the goal to guarantee the correctness of bitmap operations. Because, newly created allocation bitmap should have all available blocks free. Potentially, initialization bitmap's read operation could not fill the whole allocated memory and "garbage" in the not initialized memory will be the reason of volume coruptions and file system driver bugs.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix unlikely race in gdlm_put_lock In gdlm_put_lock(), there is a small window of time in which the DFL_UNMOUNT flag has been set but the lockspace hasn't been released, yet. In that window, dlm may still call gdlm_ast() and gdlm_bast(). To prevent it from dereferencing freed glock objects, only free the glock if the lockspace has actually been released.

In the Linux kernel, the following vulnerability has been resolved: xfrm: delete x->tunnel as we delete x The ipcomp fallback tunnels currently get deleted (from the various lists and hashtables) as the last user state that needed that fallback is destroyed (not deleted). If a reference to that user state still exists, the fallback state will remain on the hashtables/lists, triggering the WARN in xfrm_state_fini. Because of those remaining references, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_state synchronously on net exit path") is not complete. We recently fixed one such situation in TCP due to defered freeing of skbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as we currently drop dst")). This can also happen due to IP reassembly: skbs with a secpath remain on the reassembly queue until netns destruction. If we can't guarantee that the queues are flushed by the time xfrm_state_fini runs, there may still be references to a (user) xfrm_state, preventing the timely deletion of the corresponding fallback state. Instead of chasing each instance of skbs holding a secpath one by one, this patch fixes the issue directly within xfrm, by deleting the fallback state as soon as the last user state depending on it has been deleted. Destruction will still happen when the final reference is dropped. A separate lockdep class for the fallback state is required since we're going to lock x->tunnel while x is locked.