A vulnerability in the IPv4 access control list (ACL) feature and quality of service (QoS) policy feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed IPv4 packets that are received on line cards where the interface has either an IPv4 ACL or QoS policy applied. An attacker could exploit this vulnerability by sending crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to cause network processor errors, resulting in a reset or shutdown of the network process. Traffic over that line card would be lost while the line card reloads. Note: This vulnerability has predominantly been observed in Layer 2 VPN (L2VPN) environments where an IPv4 ACL or QoS policy has been applied to the bridge virtual interface. Layer 3 configurations where the interface has either an IPv4 ACL or QoS policy applied are also affected, though the vulnerability has not been observed.

A vulnerability in the handling of specific packets that are punted from a line card to a route processor in Cisco IOS XR Software Release 7.9.2 could allow an unauthenticated, adjacent attacker to cause control plane traffic to stop working on multiple Cisco IOS XR platforms.  This vulnerability is due to incorrect handling of packets that are punted to the route processor. An attacker could exploit this vulnerability by sending traffic, which must be handled by the Linux stack on the route processor, to an affected device. A successful exploit could allow the attacker to cause control plane traffic to stop working, resulting in a denial of service (DoS) condition.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands.

A vulnerability in confederation implementation for the Border Gateway Protocol (BGP) in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to a memory corruption that occurs when a BGP update is created with an AS_CONFED_SEQUENCE attribute that has 255 autonomous system numbers (AS numbers). An attacker could exploit this vulnerability by sending a crafted BGP update message, or the network could be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more. A successful exploit could allow the attacker to cause memory corruption, which may cause the BGP process to restart, resulting in a DoS condition. To exploit this vulnerability, an attacker must control a BGP confederation speaker within the same autonomous system as the victim, or the network must be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache Felix HTTP Webconsole Plugin. This issue affects Apache Felix HTTP Webconsole Plugin: from Version 1.X through 1.2.0. Users are recommended to upgrade to version 1.2.2, which fixes the issue.

CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could cause an attacker to execute unauthorized commands when a system’s default password credentials have not been changed on first use. The default username is not displayed correctly in the WebHMI interface.

CWE-287: Improper Authentication vulnerability exists that could cause an Authentication Bypass when an unauthorized user without permission rights has physical access to the EPAS-UI computer and is able to reboot the workstation and interrupt the normal boot process.

Xerox Desktop Print Experience application contains a Local Privilege Escalation (LPE) vulnerability, which allows a low-privileged user to gain SYSTEM-level access.

Improper link resolution before file access in the Nomad module of the 1E Client, in versions prior to 25.3, enables an attacker with local unprivileged access on a Windows system to delete arbitrary files on the device by exploiting symbolic links.

CWE-532: Insertion of Sensitive Information into Log Files vulnerability exists that could cause the disclosure of FTP server credentials when the FTP server is deployed, and the device is placed in debug mode by an administrative user and the debug files are exported from the device.

Improper Neutralization of Script in an Error Message Web Page vulnerability in OpenText™ Service Manager.  The vulnerability could reveal sensitive information retained by the browser. This issue affects Service Manager: 9.70, 9.71, 9.72, 9.80.

Unquoted Search Path or Element vulnerability in OpenText™ Service Manager.  The vulnerability could allow a user to gain SYSTEM privileges through Privilege Escalation. This issue affects Service Manager: 9.70, 9.71, 9.72.

A flaw was found in Smallrye, where smallrye-fault-tolerance is vulnerable to an out-of-memory (OOM) issue. This vulnerability is externally triggered when calling the metrics URI. Every call creates a new object within meterMap and may lead to a denial of service (DoS) issue.

Bypass/Injection vulnerability in Apache Camel. This issue affects Apache Camel: from 4.10.0 before 4.10.2, from 4.8.0 before 4.8.5, from 3.10.0 before 3.22.4. Users are recommended to upgrade to version 4.10.2 for 4.10.x LTS, 4.8.5 for 4.8.x LTS and 3.22.4 for 3.x releases. This vulnerability is present in Camel's default incoming header filter, that allows an attacker to include Camel specific headers that for some Camel components can alter the behaviours such as the camel-bean component, or the camel-exec component. If you have Camel applications that are directly connected to the internet via HTTP, then an attacker could include parameters in the HTTP requests that are sent to the Camel application that get translated into headers.  The headers could be both provided as request parameters for an HTTP methods invocation or as part of the payload of the HTTP methods invocation. All the known Camel HTTP component such as camel-servlet, camel-jetty, camel-undertow, camel-platform-http, and camel-netty-http would be vulnerable out of the box. This CVE is related to the CVE-2025-27636: while they have the same root cause and are fixed with the same fix, CVE-2025-27636 was assumed to only be exploitable if an attacker could add malicious HTTP headers, while we have now determined that it is also exploitable via HTTP parameters. Like in CVE-2025-27636, exploitation is only possible if the Camel route uses particular vulnerable components.

IBM App Connect Enterprise Certified Container 7.2, 8.0, 8.1, 8.2, 9.0, 9.1, 9.2, 10.0, 10.1, 11.0, 11.1, 11.2, 11.3, 11.4, 11.5, 11.6, 12.0, 12.1, 12.2, 12.3, 12.4, 12.5, 12.6, 12.7, and 12.8 could allow an authenticated user to cause a denial of service in the App Connect flow due to improper validation of server-side input.

Flarum is open-source forum software. A session hijacking vulnerability exists in versions prior to 1.8.10 when an attacker-controlled authoritative subdomain under a parent domain (e.g., `subdomain.host.com`) sets cookies scoped to the parent domain (`.host.com`). This allows session token replacement for applications hosted on sibling subdomains (e.g., `community.host.com`) if session tokens aren't rotated post-authentication. Key Constraints are that the attacker must control any subdomain under the parent domain (e.g., `evil.host.com` or `x.y.host.com`), and the parent domain must not be on the Public Suffix List. Due to non-existent session token rotation after authenticating we can theoretically reproduce the vulnerability by using browser dev tools, but due to the browser's security measures this does not seem to be exploitable as described. Version 1.8.10 contains a patch for the issue.

An Improper Isolation or Compartmentalization vulnerability in the kernel of Juniper Networks Junos OS allows a local attacker with high privileges to compromise the integrity of the device. A local attacker with access to the shell is able to inject arbitrary code which can compromise an affected device. This issue is not exploitable from the Junos CLI. This issue affects Junos OS:  * All versions before 21.2R3-S9, * 21.4 versions before 21.4R3-S10,  * 22.2 versions before 22.2R3-S6,  * 22.4 versions before 22.4R3-S6,  * 23.2 versions before 23.2R2-S3,  * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R1-S2, 24.2R2.

JSON is a JSON implementation for Ruby. Starting in version 2.10.0 and prior to version 2.10.2, a specially crafted document could cause an out of bound read, most likely resulting in a crash. Versions prior to 2.10.0 are not vulnerable. Version 2.10.2 fixes the problem. No known workarounds are available.

An integer underflow during deserialization may allow any unauthenticated user to read out of bounds heap memory. This may result into secret data or pointers revealing the layout of the address space to be included into a deserialized data structure, which may potentially lead to thread crashes or cause denial of service conditions.

In JetBrains Ktor before 3.1.1 an HTTP Request Smuggling was possible

In JetBrains Runtime before 21.0.6b872.80 arbitrary dynamic library execution due to insecure macOS flags was possible

An improper access control vulnerability exists in Bitdefender Box 1 (firmware version 1.3.52.928 and below) that allows an unauthenticated attacker to downgrade the device's firmware to an older, potentially vulnerable version of a Bitdefender-signed firmware. The attack requires Bitdefender BOX to be booted in Recovery Mode and that the attacker be present within the WiFi range of the BOX unit.

A command injection vulnerability exists in the /check_image_and_trigger_recovery API endpoint of Bitdefender Box 1 (firmware version 1.3.11.490). This flaw allows an unauthenticated, network-adjacent attacker to execute arbitrary commands on the device, potentially leading to full remote code execution (RCE).

Bitdefender Box, versions 1.3.11.490 through 1.3.11.505, uses the insecure HTTP protocol to download assets over the Internet to update and restart daemons and detection rules on the devices. Updates can be remotely triggered through the /set_temp_token API method. Then, an unauthenticated and network-adjacent attacker can use man-in-the-middle (MITM) techniques to return malicious responses. Restarted daemons that use malicious assets can then be exploited for remote code execution on the device.

The ShopLentor – WooCommerce Builder for Elementor & Gutenberg +20 Modules – All in One Solution (formerly WooLentor) plugin for WordPress is vulnerable to a Stored DOM-Based Cross-Site Scripting via the plugin's Flash Sale Countdown module in all versions up to, and including, 3.1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.