In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn't so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don't allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to >16 TB.

In the Linux kernel, the following vulnerability has been resolved: leds: mlxreg: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead.

In the Linux kernel, the following vulnerability has been resolved: jffs2: Fix potential illegal address access in jffs2_free_inode During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix inode number range checks Patch series "nilfs2: fix potential issues related to reserved inodes". This series fixes one use-after-free issue reported by syzbot, caused by nilfs2's internal inode being exposed in the namespace on a corrupted filesystem, and a couple of flaws that cause problems if the starting number of non-reserved inodes written in the on-disk super block is intentionally (or corruptly) changed from its default value. This patch (of 3): In the current implementation of nilfs2, "nilfs->ns_first_ino", which gives the first non-reserved inode number, is read from the superblock, but its lower limit is not checked. As a result, if a number that overlaps with the inode number range of reserved inodes such as the root directory or metadata files is set in the super block parameter, the inode number test macros (NILFS_MDT_INODE and NILFS_VALID_INODE) will not function properly. In addition, these test macros use left bit-shift calculations using with the inode number as the shift count via the BIT macro, but the result of a shift calculation that exceeds the bit width of an integer is undefined in the C specification, so if "ns_first_ino" is set to a large value other than the default value NILFS_USER_INO (=11), the macros may potentially malfunction depending on the environment. Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and by preventing bit shifts equal to or greater than the NILFS_USER_INO constant in the inode number test macros. Also, change the type of "ns_first_ino" from signed integer to unsigned integer to avoid the need for type casting in comparisons such as the lower bound check introduced this time.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: add missing check for inode numbers on directory entries Syzbot reported that mounting and unmounting a specific pattern of corrupted nilfs2 filesystem images causes a use-after-free of metadata file inodes, which triggers a kernel bug in lru_add_fn(). As Jan Kara pointed out, this is because the link count of a metadata file gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(), tries to delete that inode (ifile inode in this case). The inconsistency occurs because directories containing the inode numbers of these metadata files that should not be visible in the namespace are read without checking. Fix this issue by treating the inode numbers of these internal files as errors in the sanity check helper when reading directory folios/pages. Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer analysis.

The پلاگین پرداخت دلخواه WordPress plugin through 2.9.8 does not have CSRF check in place when resetting its form fields, which could allow attackers to make a logged in admin perform such action via a CSRF attack

The SportsPress WordPress plugin before 2.7.22 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)

Weak password hashing using MD5 in funzioni.php in HotelDruid before 1.32 allows an attacker to obtain plaintext passwords from hash values.

A heap buffer overflow in the function cp_unfilter() (/vendor/cute_png.h) of hicolor v0.5.0 allows attackers to cause a Denial of Service (DoS) via a crafted PNG file.

A stack overflow in the function cp_dynamic() (/vendor/cute_png.h) of hicolor v0.5.0 allows attackers to cause a Denial of Service (DoS) via a crafted PNG file.

Studio 42 elFinder 2.1.64 is vulnerable to Incorrect Access Control. Copying files with an unauthorized extension between server directories allows an arbitrary attacker to expose secrets, perform RCE, etc.

An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in iOS 17.6 and iPadOS 17.6, watchOS 10.6, tvOS 17.6, visionOS 1.3, macOS Sonoma 14.6. Processing a maliciously crafted file may lead to unexpected app termination.

This issue was addressed with improved redaction of sensitive information. This issue is fixed in macOS Sonoma 14.6, iOS 16.7.9 and iPadOS 16.7.9, macOS Monterey 12.7.6, macOS Ventura 13.6.8. An app may be able to read Safari's browsing history.

A logic issue was addressed with improved checks. This issue is fixed in iOS 16.7.9 and iPadOS 16.7.9, macOS Ventura 13.6.8, macOS Monterey 12.7.6, iOS 17.6 and iPadOS 17.6, watchOS 10.6, visionOS 1.3, macOS Sonoma 14.6. A shortcut may be able to bypass Internet permission requirements.

A path handling issue was addressed with improved validation. This issue is fixed in macOS Sonoma 14.6, iOS 17.6 and iPadOS 17.6. An app may be able to access protected user data.

This issue was addressed through improved state management. This issue is fixed in macOS Sonoma 14.6, iOS 17.6 and iPadOS 17.6, Safari 17.6. Private Browsing tabs may be accessed without authentication.

This issue was addressed with a new entitlement. This issue is fixed in macOS Sonoma 14.5, watchOS 10.5, visionOS 1.2, tvOS 17.5, iOS 17.5 and iPadOS 17.5. An app may be able to access user-sensitive data.

The issue was addressed with improved checks. This issue is fixed in watchOS 10.6, iOS 17.6 and iPadOS 17.6, iOS 16.7.9 and iPadOS 16.7.9, macOS Ventura 13.6.8. An attacker may be able to view restricted content from the lock screen.

The issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.6. A malicious application may be able to access private information.

A logic issue was addressed with improved checks. This issue is fixed in iOS 16.7.9 and iPadOS 16.7.9, macOS Ventura 13.6.8, macOS Monterey 12.7.6, iOS 17.6 and iPadOS 17.6, watchOS 10.6, visionOS 1.3, macOS Sonoma 14.6. A shortcut may be able to bypass Internet permission requirements.

This issue was addressed with improved data protection. This issue is fixed in watchOS 10.6, macOS Sonoma 14.6, iOS 17.6 and iPadOS 17.6, tvOS 17.6. An app may be able to read sensitive location information.

A race condition was addressed with additional validation. This issue is fixed in macOS Ventura 13.6.8, iOS 17.6 and iPadOS 17.6, watchOS 10.6, tvOS 17.6, macOS Sonoma 14.6. A malicious attacker with arbitrary read and write capability may be able to bypass Pointer Authentication.

A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sonoma 14.6, macOS Monterey 12.7.6, macOS Ventura 13.6.8. An app may be able to modify protected parts of the file system.

A type confusion issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.6, macOS Monterey 12.7.6, macOS Ventura 13.6.8. An attacker may be able to cause unexpected app termination.

An integer overflow was addressed with improved input validation. This issue is fixed in iOS 16.7.9 and iPadOS 16.7.9, macOS Ventura 13.6.8, iOS 17.6 and iPadOS 17.6, watchOS 10.6, tvOS 17.6, visionOS 1.3, macOS Sonoma 14.6. Processing a maliciously crafted file may lead to unexpected app termination.