A security vulnerability has been detected in Metasoft 美特软件 MetaCRM 6.4.0. The impacted element is an unknown function of the file develop/systparam/softlogo/upload.jsp. Such manipulation leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue in ESA AnomalyMatch before 1.3.1 allow attackers to execute arbitrary code via crafted model checkpoint files. The affected components load model files from session directories using torch.load() with unrestricted deserialization.

FlexRIC v2.0.0 trusts the xapp_id field from E42 message payloads without binding it to the sender's SCTP association. The validation function valid_xapp_id() only checks that the value is within the assigned range. A remote unauthenticated attacker can impersonate any xApp by specifying their xapp_id in requests sent to the iApp (port 36422), causing responses to be misrouted to the victim xApp. This can crash the victim xApp, the RIC, or the iApp itself through state inconsistencies in the red-black tree data structure.

FlexRIC v2.0.0 allows a single SCTP connection to bind multiple xapp_ids by sending multiple E42_SETUP_REQUESTs. On disconnect, only the first registered xapp_id's resources are cleaned up; subsequent xapp_ids and their subscriptions remain as stale entries. A remote attacker can exploit this to leak subscription state in the iApp, potentially causing resource exhaustion or state corruption over time.

FlexRIC v2.0.0 contains an authorization bypass in the iApp's xApp isolation mechanism. The equality function eq_xapp_ric_gen_id() in src/ric/iApp/xapp_ric_id.c compares m0->xapp_id against itself (m0->xapp_id) instead of the other argument (m1->xapp_id), effectively ignoring the xApp identity dimension. A malicious xApp connected to the iApp (port 36422) can delete any other xApp's subscriptions by sending an E42_RIC_SUBSCRIPTION_DELETE_REQUEST with a matching ric_gen_id. This breaks multi-tenant isolation in any deployment with multiple xApps sharing the same RIC.

An issue was discovered in OpenAirInterface5G 2.4.0 (nr-softmodem) in the E2SM-KPM RAN Function's PRB utilization metric calculation. The functions fill_RRU_PrbTotDl() and fill_RRU_PrbTotUl() in openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_kpm_subs.c (lines 182 and 197) compute PRB usage percentages by dividing by the difference of two consecutive total_prb_aggregate samples without checking for zero. When a malicious xApp sends a high volume of E42_RIC_SUBSCRIPTION_REQUESTs via the FlexRIC iApp (port 36422/SCTP), the E2 Agent generates KPM Indication reports at high frequency. If two consecutive sampling intervals yield identical PRB aggregate values, the divisor becomes zero, triggering SIGFPE and crashing the entire 5G base station process (nr-softmodem). This results in complete 5G cell service interruption for all connected UEs. No authentication is required.

FlexRIC v2.0.0 uses a uint16_t counter for xapp_id assignment but stores the value in uint32_t message fields. After 65,530+ E42_SETUP_REQUESTs, the 16-bit counter wraps around and produces duplicate xapp_ids. The iApp (port 36422) crashes when attempting to register a duplicate ID in its internal data structure. A remote attacker can trigger this by repeatedly connecting and requesting new xApp registrations.

FlexRIC v2.0.0 crashes when the near-RT RIC receives a RIC_INDICATION message with a ran_func_id that does not exist in its registry. The lookup returns NULL, triggering assert() in Debug builds (SIGABRT) or NULL pointer dereference in Release builds (SIGSEGV). A remote unauthenticated attacker can crash the near-RT RIC (port 36421) by sending a crafted RIC_INDICATION with an arbitrary ran_func_id value.

FlexRIC v2.0.0 contains a reachable assertion in e2ap_create_pdu() triggered when ASN.1 PER decoding fails. A remote unauthenticated attacker can send any non-PER byte sequence (e.g., a single 0x00 byte) over SCTP to the near-RT RIC (port 36421) or iApp (port 36422) to crash the process via SIGABRT. The assertion is reached before any protocol-level validation occurs. All three E2AP protocol versions (v1.01, v2.03, v3.01) are affected.

FlexRIC v2.0.0 contains a reachable assertion in e2ap_recv_sctp_msg() (src/lib/ep/e2ap_ep.c). The function allocates a fixed 32KB receive buffer and enforces assert(rc < len) on the sctp_recvmsg() return value. A remote unauthenticated attacker can send a single SCTP message with payload >= 32,768 bytes to crash the near-RT RIC, iApp, E2 Agent, or xApp process via SIGABRT. No valid E2AP PDU is required. All four SCTP endpoint types (ports 36421 and 36422) share this vulnerable code path. In Release builds (NDEBUG), the stripped assertion leads to a signed-to-unsigned integer overflow and potential out-of-bounds read.

FlexRIC v2.0.0 contains reachable assert(0) calls in stub message handlers for whitelisted but unimplemented E2AP message types in the near-RT RIC. A remote unauthenticated attacker can send a decodable E2AP PDU of such a type (e.g., E2nodeConfigurationUpdate) to crash the near-RT RIC process (port 36421) via SIGABRT. The message passes whitelist validation but triggers an unconditional assertion in the handler.

FlexRIC v2.0.0 crashes when the iApp receives an E42_RIC_SUBSCRIPTION_REQUEST referencing a non-existent E2 Node. The lookup function returns NULL, which is enforced by assert() in Debug builds (SIGABRT) and dereferenced in Release builds (SIGSEGV). A remote unauthenticated attacker can crash the iApp process (port 36422) by sending a subscription request with an arbitrary global_e2_node_id.

FlexRIC v2.0.0 crashes when the iApp receives an E42_RIC_SUBSCRIPTION_REQUEST with an empty ricEventTriggerDefinition field. The E42 layer decoder accepts this as valid, but the E2AP encoder asserts a non-empty constraint when forwarding the request. A remote unauthenticated attacker can crash the iApp process (port 36422) via SIGABRT by exploiting this cross-layer validation mismatch.

FlexRIC v2.0.0 crashes when receiving a duplicate E2_SETUP_REQUEST from the same or spoofed E2 Node. The iApp registry enforces node ID uniqueness via assert() rather than graceful rejection. A remote unauthenticated attacker can crash the iApp process (port 36421) by sending two E2_SETUP_REQUESTs with the same E2 node configuration, triggering SIGABRT.

FlexRIC v2.0.0 contains a reachable assertion in the iApp message dispatcher. The dispatcher validates incoming E2AP messages against a 9-entry whitelist using assert(). A remote unauthenticated attacker can send any decodable E2AP PDU with a message type not in the whitelist to crash the iApp process (port 36422) via SIGABRT. Since iApp and the near-RT RIC share one process, this terminates the entire RIC service and disconnects all E2 Nodes and xApps.

FlexRIC v2.0.0 uses hardcoded assertions to validate Information Element (IE) counts in decoded E2AP messages. A remote unauthenticated attacker can send a valid E2AP PDU containing an unexpected number of IEs (e.g., an E2setupRequest with extra optional fields) to crash the near-RT RIC (port 36421) or iApp (port 36422) via SIGABRT. The code asserts exact IE counts rather than validating against protocol-specified ranges.

FlexRIC v2.0.0 crashes when receiving a RIC_SUBSCRIPTION_RESPONSE with an unknown ric_id that has no corresponding pending event. The near-RT RIC uses assert() to enforce the existence of a pending event during response processing. A remote unauthenticated attacker can send a forged RIC_SUBSCRIPTION_RESPONSE to the near-RT RIC (port 36421) to cause SIGABRT in Debug builds or NULL pointer dereference (SIGSEGV) in Release builds.

FlexRIC v2.0.0 crashes when an SCTP association is closed before an E2_SETUP_REQUEST is sent. The near-RT RIC assumes a mapping between SCTP association and E2 node always exists in the cleanup path and enforces this via assert(). A remote unauthenticated attacker can crash the near-RT RIC (port 36421) by simply completing an SCTP handshake and immediately disconnecting, without sending any E2AP message.

A NULL pointer dereference in the ext4_dir_en_get_name_len function in include/ext4_dir.h of lwext4 1.0.0 allows attackers to cause a denial of service by supplying a specially crafted EXT4 filesystem image with malformed directory entries. During directory iteration, the code may fail to validate the directory entry pointer before accessing the name_len field, resulting in a segmentation fault. This affects versions based on (or equivalent to) the 2016-era codebase (1.0.0).

A segmentation violation in the gf_media_get_color_info function (/media_tools/isom_tools.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted data file.

A heap use-after-free in the dasher_process function (/filters/dasher.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MPEG-2 file.

A segmentation violation in the gf_isom_apple_set_tag_ex function (/isomedia/isom_write.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file.

A NULL pointer dereference in the gf_ac4_pres_b_4_back_channels_present function (/media_tools/av_parsers.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AC4 file.

A NULL pointer dereference in the gf_odf_ac4_cfg_dsi_v1 function (/odf/descriptors.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AC4 file.

A heap buffer overflow in the m2tsdmx_send_packet function (filters/dmx_m2ts.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file.